제품소개Heatpipe
AEOL Electronics KoreaHeatpipe
A heat pipe is a heat-transfer device that combines the principles of both thermal conductivity and phase transition to effectively transfer heat between two solid interfaces.
At the hot interface of a heat pipe a liquid in contact with a thermally conductive solid surface turns into a vapor by absorbing heat from that surface. The vapor then travels along the heat pipe to the cold interface and condenses back into a liquid – releasing the latent heat. The liquid then returns to the hot interface through either capillary action, centrifugal force, or gravity, and the cycle repeats. Due to the very high heat transfer coefficients for boiling and condensation, heat pipes are highly effective thermal conductors.
- · Mesh
- · Grooved
- · Sintering powder
- · Fiber
- L : Total Length
- W : Width
- Rc : Bending Radians
- H : Head End
- D : Diameter
- t : Thickness
- ⊙ : Bending Angle
- T : Tail End
CCI Taipei | ||
---|---|---|
Wick | D (mm) | L (mm) |
Screen Mesh | 4,5,6,8 | 70~1000 |
Ultra Thin | 2,3,4,5,6,8 | 70~350 |
Groove | 4,5,6,8 | 70~500 |
Sintered Powder | 4,5,6,8,10 | 70~1000 |
Composite pipe(GP) | 6,8 | 70~1000 |
Composite pipe(MP) | 6,8 | 70~1000 |
CCI China-JCI | ||
---|---|---|
Wick | D (mm) | L (mm) |
Screen Mesh | N/A | N/A |
Ultra Thin | 2,3,4,5,6,8 | 100~350 |
Groove | 4,5,6,8 | 100~400 |
Sintered Powder | 4,5,6,8 | 100~400 |
Composite pipe(GP) | 6,8 | 100~400 |
Composite pipe(MP) | N/A | N/A |
Note :GP = Grooved + PowderMP = Mesh + Powder